Since the update can't capture anymore...

[Slowdown]

Hello everyone...

Hope you can help me somehow...
I was used to capture the weekley cooking shows on this page

http://www.kochbar.de/

But since the last automatic update the media catcher did, it doesn't work anymore

The error description of the media catcher is the following:

Internal error while trying to download RTMP stream
Exception:
m_nErrType = 15
m_strDesc = "SWF Verification Detected -- This will be fixed soon"
m_strFile = F:\proj32\TestRTMPClient\RTMPStreamRip.cpp
m_nLineNumber = 810


Other pages still work fine...
As far as i could recognize the update changed the following plug-in:

plugin_zrtmp.dll

Don't know if it was by chance that it doesn't work since the update or if it really has to do with it...
Tried also downloading an older version of the media catcher, but while starting/running for the first time, it again updates the current up to date plugin

Hope someone knows what to do or how to get the old plugin...
The problem is that at the end of the week the videos change again...
Would be great if someone knows a solution by then...

Thanks a lot...
Wish ya a nice day...

Greetz from Germany

[tjc]

I've had the same error with http://www.rtl-now.rtl.de

Any ideas?

I'm currently using BitRecorder which is a lot less user friendly...

[Tasha Heinlein]

We are working on this guys...hope to have a fix in place soon!! I know this is frustrating and we appreciate your patience

Best Regards,

Tasha Heinlein
Applian Technologies, Inc.

[Andy Heinlein]

try it now.. this should be fixed in version 4.2.6.9 of the RTMP plug-in. You should get the plug-in update next time you start RMC.

-andy.

[MatthewC1000]

try it now.. this should be fixed in version 4.2.6.9 of the RTMP plug-in. You should get the plug-in update next time you start RMC.

-andy.

What site does the capture plugin support?
Still will not capture from porntube site even after plugin update.

Internal error while trying to download RTMP stream
Exception:
m_nErrType = 5
m_strDesc = "Connection was closed by remote host"
m_strFile = F:\proj32\TestRTMPClient\RTMPStreamRip.cpp
m_nLineNumber = 128

[Andy Heinlein]

what's with the constant "need it to work with porntube" banter?

There are 1000's of porntube-like sites out there that Media Catcher works with... it's all the same thing over and over.

I will fix that site when I finish the other higher-priority sites and add support for the Flash Player 10.

[AlanTAK69]

Hello everyone...

Don't know if it was by chance that it doesn't work since the update or if it really has to do with it...
Tried also downloading an older version of the media catcher, but while starting/running for the first time, it again updates the current up to date plugin

Hope someone knows what to do or how to get the old plugin...
The problem is that at the end of the week the videos change again...
Would be great if someone knows a solution by then...

Thanks a lot...
Wish ya a nice day...

Greetz from Germany

Copy your RMC directory to a backup spot.
Install RMC the 2.4 version so you can get the old plugin.
Copy the RMC 2.4 version somewhere else.
Move your newer RMC back to where it goes.

This has you with newer RMC back in original place, and a copy of the old plugins in the old RMC version.

Now copy older version plugin_zrtmp.dll into your real RMC plugin directory. Right click plugin_zrtmp.dll and do properties and check Read Only. At least now the automagic update will fail, YEAH!

Would be awfully nice if there were things like "stop automatic updates" and "revert to older working version instead of keeping broken new version" and a place to get older plugins etc without having to jump through a bunch of hoops, but at least this should get you back to working. I'm now back to working ok instead of not being able to start streams if others have been running a while.

Might want to turn off forced beta tester mode and set all of your other plugins to read only too while you're in there.

Cheers!

[Slowdown]

Copy your RMC directory to a backup spot.
Install RMC the 2.4 version so you can get the old plugin.
Copy the RMC 2.4 version somewhere else.
Move your newer RMC back to where it goes.

This has you with newer RMC back in original place, and a copy of the old plugins in the old RMC version.

Now copy older version plugin_zrtmp.dll into your real RMC plugin directory. Right click plugin_zrtmp.dll and do properties and check Read Only. At least now the automagic update will fail, YEAH!

...
Cheers!

Thanx for the good hint
As mentioned above it luckly works again at the moment...
But this solution could be great for future updates to be on the safe side!!!

Thanks for your contribution...
Wish you all the best as usual..
Greetz