Results 1 to 9 of 9

Thread: First marker adds 6 seconds to output file

  1. #1
    Join Date
    Dec 2009
    Location
    Bloomingdale, MI
    Posts
    2
    Rep Power
    0

    Default First marker adds 6 seconds to output file

    I just started using Replay Media Splitter. Using avi format, I have found that, irregardless of where I set my first marker to denote the start of the segment I desire, my outputted file begins approximately 6 seconds prior to where I set my mark. The end marker usually works properly. I've tried it on numerous segments of several different inputted files with the same results.
    What am I doing wrong? Also, there are several choices under Control that I have been investigating. Could anyone tell me what each one does (or doesn't) do?
    Thank you for any help or advice.

  2. #2
    Join Date
    Feb 2008
    Posts
    4,329
    Rep Power
    10

    Default Re: First marker adds 6 seconds to output file

    Try and zoom in to see if it resolves the issue. Another thing to do is enter the exact time you want it to start and stop on the right hand side of the program.

  3. #3
    Join Date
    Dec 2009
    Location
    Bloomingdale, MI
    Posts
    2
    Rep Power
    0

    Default Re: First marker adds 6 seconds to output file

    Cheryl,

    The problem continues, but only with certain converted files. I converted 3 dvds (VOS) to avi (mpeg 4) high quality. No matter how much I zoom in, for greater sensitivity, I'm still having the problem of the first marker not marking where I wish to start. In other words, when I reach that point where I want to begin to save a segment, and set the first marker; continue through the process and trim or output the file, and play the outputted file back, I find that it starts approximately 6 seconds before that spot where I set the first marker. I've tried readjusting the actual start time of the segment I wish to keep, and find out I can make it work by adding approximately 6 seconds to the start time. But this is not very handy. Have you ever seen this problem before, or am I lucky enough to be the first? As I said, this problem only appears to be associated with converted dvds. Other files I have used are not giving me this same problem.

    If you have not seen this before, I'll assume it is just a quirk with my system and try to get by with it. I would like to know what the Control settings do, if you would be kind enough to explain them for me. I have not been able to find any explanation in this forum or in your help files.

    Thank you for any help or information you can provide.

  4. #4
    Join Date
    Jan 2010
    Posts
    8
    Rep Power
    0

    Default Re: First marker adds 6 seconds to output file

    I've been having similar issues, just in the last few weeks. Previously, the trimmed files would start and stop where I had specified, but now the beginning and end of the trimmed segment is several seconds prior to where I had wanted it. So I'm finding the trimmed file begins with the last several seconds of content I had wanted to exclude - sometimes 30 seconds or more - and also the end of the file is cutting off earlier than I want so I miss the end of the program or file I was working with. Very annoying. It's been working very well for about a year and a half - is there any chance this is an issue with the update I recently installed (late last year, I think)?

  5. #5
    Join Date
    Sep 2010
    Posts
    2
    Rep Power
    0

    Unhappy Re: First marker adds 6 seconds to output file

    Yes! I'm having the same exact problem. Split files always have an extra 6 or 7 seconds added to the beginning from the end of the previous file. It's extremely annoying and makes the software pretty useless. I see this has been going on for 4 years now with no solution, even after several versions. Come on Applian, help us out!!

  6. #6
    Join Date
    Sep 2010
    Posts
    2
    Rep Power
    0

    Default Re: First marker adds 6 seconds to output file

    OK, I think I found a workaround for this problem. If you want a fragment to start exactly at the marker, you have to "thumbs down" the previous fragment. Then your fragment will start exactly when you specify. Of course this means that you can't "save all fragments." You have to save each fragment individually after giving the thumbs down to the fragment before it. It's not a solution but it's better than nothing. Applian really should fix this bug though, it has gone on far too long and really isn't acceptable in a commercial product whose only purpose is to cut video!

  7. #7
    Join Date
    Jun 2014
    Posts
    7
    Rep Power
    0

    Default Re: First marker adds 6 seconds to output file

    this issue still exists. I'm having the same problem. When I do the thumbs up/down thing, I sometimes get a few extra frames and cannot remove them from the new file.

  8. #8
    Join Date
    Feb 2008
    Posts
    4,329
    Rep Power
    10

    Default Re: First marker adds 6 seconds to output file

    If you do have a specific issue please do send a ticket to tech support with details. Don't forget to include the format and size of the file.

  9. #9
    Join Date
    Nov 2013
    Posts
    1
    Rep Power
    0

    Default Re: First marker adds 6 seconds to output file

    Quote Originally Posted by Cheryl Wester View Post
    If you do have a specific issue please do send a ticket to tech support with details. Don't forget to include the format and size of the file.
    Apparently this problem has never been solved? I've tried using Media Splitter instead of converting from mp4 to mpg and using VideoReDo. It doesn't start the splitting at the appropriate frame. Adds 3 to 6 seconds to the beginning of the cut.

    I can't even cut out the unwanted section from the first split off clip.

    Using
    Replay Media Splitter
    Installed version: 3.0.1703.9
    Status: Registered Version

    Original .mp4 file size is 389 MB (408,705,596 bytes)
    split .mp4 file size is 75.6 MB (79,349,015 bytes)

    I don't see how to submit a ticket.

Similar Threads

  1. mp3 output file write error
    By bmizock in forum Replay A/V
    Replies: 4
    Last Post: 10-12-2009, 11:37 AM
  2. 2 screens for see the beginning and the end of the marker
    By starmanager in forum Replay Media Splitter
    Replies: 1
    Last Post: 06-25-2009, 06:27 PM
  3. records for about 7 seconds
    By booch11 in forum Replay Media Catcher
    Replies: 4
    Last Post: 12-16-2008, 09:36 PM
  4. Demo 18 seconds off?
    By bdemz in forum Replay Music
    Replies: 3
    Last Post: 11-14-2008, 03:09 PM
  5. 12 seconds of dead air
    By woodysan831 in forum Replay Music
    Replies: 5
    Last Post: 04-27-2008, 10:38 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About these forums...
Applian Technologies makes these discussion forums available for our customers to assist other users. We do read this content and appreciate all your suggestions and comments. If you need technical support or customer service, please visit the links to the right.
Let's Be Friends