Results 1 to 9 of 9

Thread: Recording from Rhapsody

  1. #1
    Join Date
    Mar 2008
    Posts
    4
    Rep Power
    0

    Default Recording from Rhapsody

    I have a question about how to record music from Rhapsody. Do I launch Rhapsody first or do I import the songs into RM. I thought all I had to do is launch Rhapsody and then RM, click on record and as the songs were played RM would grab them. Any help would be appreciated.

    Jim

  2. #2
    Join Date
    Feb 2008
    Posts
    4,488
    Rep Power
    10

    Default

    Hi

    You always need to launch our program first. Select start recording. Then go to what you want to capture.

  3. #3
    Join Date
    Mar 2008
    Posts
    4
    Rep Power
    0

    Default

    That didn't seem to work so I am wondering what else I did wrong.

    1. Launched RM
    2. Started Recording
    3. Launched Rhapsody
    4. Selected My Lib and started playing the sounds.

    Nothing gets added. Is there a step I am missing here?

    Thank y

    Jim

  4. #4
    Mike Christensen's Avatar
    Mike Christensen is offline Lead Software Developer, Applian Technologies
    Join Date
    Feb 2008
    Posts
    112
    Rep Power
    10

    Default

    Quote Originally Posted by jray9242 View Post
    That didn't seem to work so I am wondering what else I did wrong.

    1. Launched RM
    2. Started Recording
    3. Launched Rhapsody
    4. Selected My Lib and started playing the sounds.

    Nothing gets added. Is there a step I am missing here?

    Thank y

    Jim
    Jim,

    If you have the latest version of RM, you have to make sure that the Rhapsody audio signal is locked into RM. The status message in RM should read "Rhapsody" if Rhapsody is locked in. Your steps are a little out of order. Please try this:

    1. Launch RM.
    2. Launch Rhapsody.
    3. Start Recording.
    4. Start playing a song from Rhapsody.

    RM will usually lock into the first audio source it detects and will not start recording until it detects the audio. In some cases another program may cause RM to lock into it, and you will see the program name in the RM status message if RM locked into it. If it's not Rhapsody, click the "Stop Recording" button and start a new recording session and try playing Rhapsody again.

    Regards,
    Mike Christensen

  5. #5
    Join Date
    Feb 2008
    Location
    USA
    Posts
    72
    Rep Power
    17

    Question

    Quote Originally Posted by Mike Christensen View Post
    Jim,

    If you have the latest version of RM, you have to make sure that the Rhapsody audio signal is locked into RM. The status message in RM should read "Rhapsody" if Rhapsody is locked in. Your steps are a little out of order. Please try this:

    1. Launch RM.
    2. Launch Rhapsody.
    3. Start Recording.
    4. Start playing a song from Rhapsody.

    RM will usually lock into the first audio source it detects and will not start recording until it detects the audio. In some cases another program may cause RM to lock into it, and you will see the program name in the RM status message if RM locked into it. If it's not Rhapsody, click the "Stop Recording" button and start a new recording session and try playing Rhapsody again.

    Regards,
    Mike Christensen
    Where on the screen are these status messages? Are they in the status bar at the bottom? I don't recall hearing anything in my status bar.

  6. #6
    Mike Christensen's Avatar
    Mike Christensen is offline Lead Software Developer, Applian Technologies
    Join Date
    Feb 2008
    Posts
    112
    Rep Power
    10

    Default

    Quote Originally Posted by petrogia View Post
    Where on the screen are these status messages? Are they in the status bar at the bottom? I don't recall hearing anything in my status bar.
    The status message is on the top left side of Replay Music's main window. When recording from Rhapsody, if for instance you are recording your first track it should say, "Status: Recording Track 1 of rhapsody"

    Regards,
    Mike Christensen

  7. #7
    Join Date
    Feb 2008
    Location
    USA
    Posts
    72
    Rep Power
    17

    Default

    Quote Originally Posted by Mike Christensen View Post
    The status message is on the top left side of Replay Music's main window. When recording from Rhapsody, if for instance you are recording your first track it should say, "Status: Recording Track 1 of rhapsody"

    Regards,
    Mike Christensen
    Mike
    Thank you for this information. I believe I can locate it with my JAWS cursor here. For my own use and to learn about Replay Music 3.30. And to assist other blind users who may ask this question in the future.

  8. #8
    Join Date
    Mar 2008
    Posts
    4
    Rep Power
    0

    Default

    PERFECT! It worked like a champ. There was a setting in RM I had to make and when I did, it worked perfect.

    Thank you

    Jim

  9. #9
    Join Date
    Jun 2008
    Posts
    1
    Rep Power
    0

    Default

    What setting did you change?

Similar Threads

  1. Replies: 3
    Last Post: 10-16-2009, 07:05 PM
  2. Rhapsody
    By Helipilot in forum Replay Music
    Replies: 3
    Last Post: 05-12-2009, 10:00 AM
  3. Replies: 3
    Last Post: 04-25-2009, 08:06 AM
  4. RM & Rhapsody...Update
    By DaddyMac in forum Replay Music
    Replies: 16
    Last Post: 03-25-2009, 02:26 PM
  5. Rhapsody and RM3 - Diff. Take
    By DaddyMac in forum Replay Music
    Replies: 0
    Last Post: 01-03-2009, 10:41 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About these forums...
Applian Technologies makes these discussion forums available for our customers to assist other users. We do read this content and appreciate all your suggestions and comments. If you need technical support or customer service, please visit the links to the right.
Let's Be Friends