PDA

View Full Version : Unable to Capture Fox



zabinja
09-28-2008, 12:39 PM
I am unable to Capture episodes from FOX. Please advise.

Tasha Heinlein
09-28-2008, 02:37 PM
I am unable to Capture episodes from FOX. Please advise.

Fox uses the Move Player, which Media Catcher isn't compatible with. You can try using a screen capture program such as WM Capture:

http://www.wmrecorder.com/wm_capture.php

For a list of some major sites and the programs we recommend to record them please click here:

http://applian.com/recording_solutions/index.php

Best Regards,

Tasha Heinlein
Applian Technologies, Inc.

zabinja
09-28-2008, 03:17 PM
Thanks for the tip. Any plans for Media Catcher to work with that application in the future?

- Great suite of tools by the way. Keep up the good work.

MatthewC1000
09-28-2008, 03:53 PM
Fox uses the Move Player, which Media Catcher isn't compatible with. You can try using a screen capture program such as WM Capture:

http://www.wmrecorder.com/wm_capture.php

For a list of some major sites and the programs we recommend to record them please click here:

http://applian.com/recording_solutions/index.php

Best Regards,

Tasha Heinlein
Applian Technologies, Inc.

I tried WM Capture / WM Recorder, Tasha and, both fail...WM Capture records but, no sound on the output...just giving you the heads up;)
Looks like applian is gonna have to release updates to keep up with the
demands of online video streams ;)

Tasha Heinlein
09-28-2008, 04:02 PM
I tried WM Capture / WM Recorder, Tasha and, both fail...WM Capture records but, no sound on the output...just giving you the heads up;)
Looks like applian is gonna have to release updates to keep up with the
demands of online video streams ;)

Hmmm.. I'll go check that out. Thanks for the heads up!!

Best Regards,

Tasha Heinlein
Applian Technologies, Inc.

MatthewC1000
09-28-2008, 04:26 PM
Hmmm.. I'll go check that out. Thanks for the heads up!!

Best Regards,

Tasha Heinlein
Applian Technologies, Inc.


I wanna apologize for something I missed and, over-looked ...the audio was not enabled
therefore no audio was captured. The only problem I found was: that the
the program seems to use alot of resources like 99 CPU and,
The page seems to not continue playing the video stream properly but,
it is captured nonetheless I'm running on 2 gigs of RAM and on XP Home. So, I don't know...*shrugs*

Jeff Lenney
09-28-2008, 07:19 PM
I tried WM Capture / WM Recorder, Tasha and, both fail...WM Capture records but, no sound on the output...just giving you the heads up;)
Looks like applian is gonna have to release updates to keep up with the
demands of online video streams ;)

Hi Matthew,

For WM Capture, FOR WINDOWS XP ONLY: please Make sure you change the settings for "Audio Source" and "Stereo Mix INput" to use the "Universal Audio Driver" option (with no input source specified).

IF YOU'RE USING VISTA, PLEASE IGNORE THE ABOVE AND DO WHAT'S BELOW:

Go ahead and refer to the following link for instructions on how to enable an audio recording line in Windows Vista:

http://www.applian.com/support-vista.php#sc

Also, for vista, I would like you to go into the Settings of WM Capture by clicking the "Settings" button, then click the "Audio Setup/Test button."

We are interested in what is listed under the Audio Sources. Is there anything there besides the Universal Audio Driver?

If so, when each of the other options are selected, is there a "Wave," "Stereo Mix," "What-U-Hear" or anything along those lines listed under "Audio Inputs" (The column just to the right)? For example, My Audio Inputs says Stereo Mix, Line-In, Microphone and a few others..

Let me know if this helps. =)

MatthewC1000
09-28-2008, 08:16 PM
Can you post a screen shot of your WM Capture 'settings'....thx :)
so, I match them...thanks for the great support! Im On XP Home sp3 btw :)

Jeff Lenney
09-28-2008, 08:38 PM
Hi Matthew,

No need to post a screenshot, it's quite easy actually.

For Video, I have Mpeg-2 as the video format, with the bitrate and frames set to their defaults.

For audio set up, I Selected by Audio Card (realtek) and "stereo mix".

Hope this helps. :)

MatthewC1000
09-28-2008, 08:48 PM
I don't see where to select my sound card, jeff in wm capture settings...I think it would help if a screen shot would be posted its self explainatory..im using WM Capture 3.0 btw

Jeff Lenney
09-29-2008, 10:33 AM
Hi Matt

Here is my main screen.
http://img.photobucket.com/albums/v297/ximadorkx/wmc1.jpg
Here are my audio settings.
Keep in mind though, what is available for me and what works for me might be different from what you have available.

http://img.photobucket.com/albums/v297/ximadorkx/wmcsound-1.jpg

I hope this helps. :-)

MatthewC1000
09-29-2008, 02:27 PM
Hi Matt

Here is my main screen.
http://img.photobucket.com/albums/v297/ximadorkx/wmc1.jpg
Here are my audio settings.
Keep in mind though, what is available for me and what works for me might be different from what you have available.

http://img.photobucket.com/albums/v297/ximadorkx/wmcsound-1.jpg

I hope this helps. :-)

Thx for the screen images...there were some settings I had that did not match your settings...so, it does help :)

Jeff Lenney
09-29-2008, 06:06 PM
Wonderful, glad to be of assistance. :D

You might want to click on 'recomended settings' on the top of the main screen, however, as you can customize things more to the types of video files you're recording.